A: Hi Marc, No, it won't work in that model, but our single stage trigger will work. -Good shooting! -MKidd
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Administrator (6/13/2025)
Q:Hello, will this upgrade work with aluminum parts? Thanks!
Asked by: Bobby
- 8/21/2024
A: Hi Bobby, The answer is sometimes... We recommend dropping our trigger job kit into polymer units because we have found them to have more consistent dimensions. This consistency is not noticeable with the factory parts installed but when installing the trigger job kit there is not as much "room" for inconsistencies. We have nearly 100% success rate in the polymer and about 65% in the metal housings. -Good shooting!
Was this answer helpful?
1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Administrator (8/22/2024)
Q:In the pictures for your trigger job kit it shows a polymer housing with a pinned fixed ejector instead of the flippy floppy one that comes in the OEM housing. Is this an available aftermarket option?
Asked by: Mike
- 8/18/2024
A: Hi Mike, Great question, a hole needs to be drilled in the trigger for the cross pin that holds the fixed ejector. This is tricky for the average "Joe" to hold and drill in the perfect location. That is why we don't offer this as an upgrade, though the flippy floppy one is very annoying. -Good shooting!
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Administrator (8/22/2024)
Q:Does the "Trigger Job" Kit work on older 10/22's with metal (aluminum ?) trigger and trigger group? I see explicit mention of "stock polymer", so it seems like it might not. The 10/22 I have is about 28 years old. Thanks.
Asked by: Jayson Burak
- 8/16/2022
A: We do not recommend our trigger job for use in aluminum guards. Although we have had happy customers who say it has worked in their aluminum guards, we cannot guarantee this. It is a hit or miss situation because the hole placements are not always consistent.
Was this answer helpful?
1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Shalee (8/16/2022)
Q:Will the Kidd Trigger Job Kit work in the Ruger metal trigger assembly?
Asked by: Nick Jakob
- 6/14/2022
A: We do not recommend our trigger job for use in aluminum guards. Although we have had happy customers who say it has worked in their aluminum guards, we cannot guarantee this. It is a hit or miss situation because the hole placements are not always consistent.
Was this answer helpful?
0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Shalee (6/14/2022)
Q:is there a trigger kit for the old aluminum housing ?
Asked by: craig
- 5/15/2022
A: We do not recommend our trigger job for use in aluminum guards. Although we have had happy customers who say it has worked in their aluminum guards, we cannot guarantee this. It is a hit or miss situation because the hole placements are not always consistent.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (5/15/2022)
Q:I’ve purchased a Supergrade barreled action and several other Kidd products. I’m interested in buying an internal up grade kit for a Ruger BX triggers. I read 2 answers to questions about the kit and BX triggers. I want to know if the trigger upgrade kit is compatible with the Ruger BX trigger before I submit my order?. Thanks
Robert Qualls
Asked by: Robert Qualls
- 4/25/2022
A: Yes, it will work.
Was this answer helpful?
2 of 2 Customer(s) found this Answer helpful.
Answer provided by: Shalee (4/25/2022)
Q:Will this kit work on a BX Trigger?
Asked by: Joe
- 2/27/2021
A: Yes, it will work.
Was this answer helpful?
6 of 6 Customer(s) found this Answer helpful.
Answer provided by: Shalee (2/27/2021)
Q:Can you ship to Canada?
Asked by: Michael
- 1/30/2020
A: Please visit our International Sales page for more information regarding international ordering.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (1/30/2021)
Q:will the spring kit allow me to lighten the pull on the trigger? I dont see the padded bolt stop pin.
Asked by: james clarke
- 11/4/2019
A: Yes, the spring kit will help you tune your pull weight. The bolt buffer is part number 12.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (11/4/2019)
Q:I have an two older model Ruger 10/22 rifle with a aluminum trigger guard , I read that this kit will work in about 70% of those trigger housings. What would cause this kit not to work in mine . Is there anything I can check on it to rule out that it will not work ? Thanks for your time , G.G.
Asked by: Greg Gross
- 4/23/2018
A: We do not recommend our trigger job for use in aluminum guards. Although we have had happy customers who say it has worked in their aluminum guards, we cannot guarantee this. It is a hit or miss situation because the hole placements are not always consistent. Good Shooting-Shalee
Was this answer helpful?
1 of 2 Customer(s) found this Answer helpful.
Answer provided by: Shay (4/23/2018)
Q:Will this kit work in an older (metal) trigger assembly? Thanks
Asked by: terry
- 4/9/2018
A: We do not recommend our trigger job for use in aluminum guards. Although we have had happy customers who say it has worked in their aluminum guards, we cannot guarantee this. It is a hit or miss situation because the hole placements are not always consistent. Good Shooting-Shalee
Was this answer helpful?
2 of 2 Customer(s) found this Answer helpful.
Answer provided by: Shay (4/9/2018)
Q:Does this kit have an adjustable type sear, to take out creep?
Asked by: Bryan
- 1/23/2018
A: You shouldn't have not make any adjustments to this drop in trigger. The trigger is preset to have no "creep".
Good Shooting-Shalee
Was this answer helpful?
3 of 3 Customer(s) found this Answer helpful.
Answer provided by: Shay (1/23/2018)
Q:I have a 10/22 with the aluminum trigger housing made in the 1960's. This specifies polymer housing. Will it work with my aluminum one?
Asked by: Eric
- 12/10/2017
A: We do not recommend our trigger job for use in aluminum guards. Although we have had happy customers who say it has worked in their aluminum guards, we cannot guarantee this. It is a hit or miss situation because the hole placements are not always consistent.
Good Shooting-Shalee
Was this answer helpful?
3 of 3 Customer(s) found this Answer helpful.
Answer provided by: Shay (12/11/2017)
Q:Does this kit need shims between disconnect and trigger and sear and trigger?
Asked by: Brandon
- 4/8/2017
A: This kit does not require any shims. Good Shooting-Shalee
Was this answer helpful?
4 of 4 Customer(s) found this Answer helpful.
Answer provided by: Shay (4/10/2017)
Q:Is this a single stage or double stage pull? How much take up is there?
Asked by: Rude374
- 6/6/2016
A: Thank you for your interest. Our trigger job kit is a single stage break. There is no take up! Good shooting! KIDD
Was this answer helpful?
15 of 16 Customer(s) found this Answer helpful.
Answer provided by: Administrator (6/6/2016)
Q:Will this kit work on a 22 mag?
Asked by: Allan
- 4/27/2016
A: Yes. Good shooting! KIDD
Was this answer helpful?
6 of 6 Customer(s) found this Answer helpful.
Answer provided by: Administrator (4/28/2016)
Q:What is in the spring kit? What trigger pull set up is the is the lightest possible to achieve (trying to get as close to 10 Oz as is possible on a 10/22 .I am attempting to shoot alternating relays with my Anschutz [10 oz])
Asked by: Ron
- 4/10/2016
A: Our single stage trigger or trigger job kit doesn't break that light. I recommend our two stage trigger for that light of a break. Good shooting! KIDD
Was this answer helpful?
7 of 7 Customer(s) found this Answer helpful.
Answer provided by: Administrator (4/12/2016)
Q:It's the drop in trier kit the same as the single stage trigger group but without the housing? It says just under 2 lbs, it's that with the 1.5lb spring?
Thanks
Asked by: Jordan
- 3/9/2016
No Answers have been submitted yet.
Q:What will the trigger pull weight be with this kit installed if nothing else but these parts are changed on a new LVT version Ruger 10/22 ?
Asked by: William King
- 2/12/2016
A: Normally, customers achieve a break just under 2 pounds with this upgrade installed. Good shooting! KIDD
Was this answer helpful?
27 of 28 Customer(s) found this Answer helpful.
Answer provided by: Administrator (2/16/2016)
Q:Can this trigger job be worn out and if so how many shots can I expect this trigger job to last?
Asked by: Andrew
- 1/29/2016
A: I suppose that anything can be worn out eventually, but we haven't been able to ware one out yet. Good shooting! KIDD
Was this answer helpful?
11 of 11 Customer(s) found this Answer helpful.