Q: On other places on your web site you say that a free floating barrel is recommended and more accurate. However, I understand that the Magpul Hunter x22 sock has a "lip" on the end of the barrel channel which the barrel rests on, making it non-free floating. Is this so, and does it impact accuracy.? Thanks.

Asked by: Jack Broadhurst - 11/7/2016
A: We modify the Hunter X-22 stock to ensure the barrel is fully free floated. Good Shooting-Shalee
Was this answer helpful?  77 of 77 Customer(s) found this Answer helpful.
Answer provided by: Shay (11/7/2016)

Q: Hello. Which set-up would allow me to compete in 100-yard competitions and steel challenge? I am ok with swapping barrels for steel challenge to reduce weight. What would be the base configuration that I could build on to participate in both disciplines? I would likely need to change The stock? Unsure of the trigger... I currently have a Magpul X-22 and it is too heavy for steel challenge but works for long distance shooting. Please let me know. Thank you.

Asked by: [email protected] - 6/24/2016
A: I understand your dilemma, generally these two rifles would be on opposite sides of the spectrum. The 100 yard competition would have a 20" barrel, heavy stock, two stage trigger and the steel challenge rifle would have an ultra light weight barrel, light stock, and single stage trigger. So for a happy medium, I would recommend the 18" light weight, the Magpul stock since it will already be on the rifle, and the single stage trigger. Good shooting! KIDD
Was this answer helpful?  41 of 41 Customer(s) found this Answer helpful.
Answer provided by: Administrator (6/24/2016)

Q: On the supergrade receiver what need is there for the rear access hole since rifle needs to be disassembled to remove the bolt to allow a cleaning rod to pass into the chamber side of the barrel. Just wondering?

Asked by: art - 11/7/2016
A: Great question. The rear cleaning hole gives you direct access to the chamber without having to go through the muzzle end of the barrel. This is needed when cleaning with a cleaning rod. When you clean your barrel from the chamber of the barrel to the muzzle, you are less likely to damage the crown of the barrel. Good Shooting-KIDD
Was this answer helpful?  34 of 36 Customer(s) found this Answer helpful.
Answer provided by: Shay (11/7/2016)

Q: AN THIS RIFLE BE ORDERED WITH EMBEDDED ACTION?

Asked by: dEAN tAKEUCHI - 12/5/2016
A: This rifle does come with the action bedded into the stock. Good Shooting-KIDD
Was this answer helpful?  31 of 31 Customer(s) found this Answer helpful.
Answer provided by: Shay (12/6/2016)

Q: The video demonstrating this rifle has a Magpul flat dark earth stock, yet there is not an option for a FDE stock, only black. Is a flat dark earth stock available?

Asked by: Jack - 6/28/2016
A: Thank you for your question. We are working on getting more stock color options. But for now you can have any color you want as long as it's black. Good shooting! KIDD
Was this answer helpful?  25 of 25 Customer(s) found this Answer helpful.
Answer provided by: Administrator (6/30/2016)

Q: What is the guaranteed Moa with this user friendly removable barrel?

Asked by: Rob - 6/21/2016
A: Hi Rob, We guarantee 1/2" at 50 yards with any of our barrels. Thanks for your interest. Good shooting! KIDD
Was this answer helpful?  22 of 22 Customer(s) found this Answer helpful.
Answer provided by: Administrator (6/23/2016)

Q: How do I order an extra barrel for the super grade order I am ready to place?

Asked by: Terry Williams - 6/21/2016
A: Hi Terry, Thank you for your interest. Go to coolguyguns.com/Barrels/Supergrade Rifle Barrels/Supergrade Barrels. Good shooting! KIDD
Was this answer helpful?  21 of 21 Customer(s) found this Answer helpful.
Answer provided by: Administrator (6/23/2016)

Q: Does the Supergrade Premium Rifle Custom Build come assembled ready to shoot or do I have to assemble it myself ?

Asked by: Larry Dale - 7/17/2017
A: Hi Larry,
The KIDD Supergrade Premium Rifle Custom Build comes completely installed receiver to shoot when you receive it. Good Shooting-Shalee
Was this answer helpful?  21 of 22 Customer(s) found this Answer helpful.
Answer provided by: Shay (7/17/2017)

Q: Does you 16.5 inch ultra light barrel still expect to stay with in 1/2" group some of your literature says not and some say all of your barrels will stay that tight at 50 yards on your super grade rifle?

Asked by: Daniel Stephan - 7/26/2017
A: With the KIDD Supergrade all KIDD Barrels including the Ultra Lightweight Barrels are guaranteed to shoot within 1/2" groups at 50 yards. Good Shooting-Shalee
Was this answer helpful?  20 of 20 Customer(s) found this Answer helpful.
Answer provided by: Shay (7/27/2017)

Q: Do you sell this stock by itself, with the bedding and inlet for the rear tang?

Asked by: Ted Becker - 5/3/2017
A: Hi Ted,
You will need to purchase the action with the stock to allow us to bed it in place to ensure a perfect fit. Good Shooting-Shalee
Was this answer helpful?  16 of 18 Customer(s) found this Answer helpful.
Answer provided by: Shay (5/3/2017)

Q: Can this rifle be ordered with the rear tang on the receiver?

Asked by: Willard Palmer - 5/26/2017
A: Hi Willard,
Our Supergrade rifle comes default with the rear tang installed and bedded to the stock. Good Shooting-Shalee
Was this answer helpful?  16 of 16 Customer(s) found this Answer helpful.
Answer provided by: Shay (5/29/2017)

Q: what is delivery time?

Asked by: mark - 3/22/2018
A: Our current wait time is a maximum of 2 weeks. Good Shooting-KIDD
Was this answer helpful?  10 of 10 Customer(s) found this Answer helpful.
Answer provided by: Shay (3/22/2018)

Q: Do you make a .22mag version of the supergrade premium rifle ?

Asked by: DGD - 8/23/2016
A: Hi DGD, Thank you for your interest, but we only offer the .22 LR at this time. Good shooting! KIDD
Was this answer helpful?  9 of 9 Customer(s) found this Answer helpful.
Answer provided by: Administrator (8/23/2016)

Q: Hello. Does the supergrade rifle custom build include the bolt buffer? Thanks!

Asked by: Patrick - 5/13/2018
A: Yes, the KIDD Supergrade Rifle comes with all the small pieces including the bolt buffer to build a complete rifle. Good Shooting-KIDD
Was this answer helpful?  8 of 8 Customer(s) found this Answer helpful.
Answer provided by: Shay (5/15/2018)

Q: Would you be willing to install a black McMillan 10/22 Sporter stock instead of the standard Magpul? I understand this would negatively affect the ease of performing barrel swaps. Thank you

Asked by: Dan - 5/14/2018
A: We only sell the complete rifle on the Magpul stock. However, we do sell the barreled action which includes everything minus the stock and will drop into the McMillan stock without any issues. Good Shooting-KIDD
Was this answer helpful?  8 of 9 Customer(s) found this Answer helpful.
Answer provided by: Shay (5/15/2018)

Q: I just received my Supergrade and am extremely pleased with it. What barrel options are available for the quick change feature with this rifle? I would like to buy an 18 inch, fluted and threaded, SS, bead blasted. Thanks for building such a great rifle! Joe Stewart Col Joseph T Stewart USAF (Ret.)

Asked by: Joseph Stewart - 11/23/2017
A: Hi Joe, Thank you for your purchase and I am happy that you are enjoying it. Majority of our barrels are available for the Supergrade. In the category section select barrels and there will be a sub category that list our Supergrade barrels. Feel free to call us and we can help you place the order as well. Good Shooting-KIDD
Was this answer helpful?  7 of 8 Customer(s) found this Answer helpful.
Answer provided by: Shay (11/23/2018)

Q: Is there a black spiral fluted barrel option for this rifle?

Asked by: john - 12/21/2017
A: Hi John, Yes, our spiral and diamond flutes are available on our Supergrade action. Good Shooting-KIDD
Was this answer helpful?  7 of 7 Customer(s) found this Answer helpful.
Answer provided by: Shay (12/21/2017)

Q: If I get one of your super grades is the lead time 2 weeks accurate? Doesn’t matter which config I pick it will always be 2 weeks?

Asked by: Scott - 1/29/2018
A: Hi Scott, Our 2 week delay is a maximum wait time no matter what configuration you choose. Good Shooting-Shalee
Was this answer helpful?  7 of 7 Customer(s) found this Answer helpful.
Answer provided by: Shay (1/29/2018)

Q: I'm interested in this rifle and have a couple of questions. 1. Can the action be removed from the stock to access the trigger for cleaning? 2. Can the barrel be cleaned from the breech end with the rear tang? Thanks!

Asked by: Haley - 6/26/2018
A: The complete action can be removed from the stock by removing the rear tang screw as well as the takedown screw so that you can clean the internal parts as well as the trigger unit. You can clean the barrel from the breech by either removing the barrel from the receiver or using the rear cleaning hole at the back of the receiver. To access this hole you will need to remove the rear tang.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Shalee (6/26/2018)

Q: I'm considering a Supergrade for bench rest target shooting. Does the threaded barrel with muzzle brake help or hurt accuracy? Was thinking of the 20" polished barrel with brake. Thanks.

Asked by: Dan - 6/8/2018
A: Threading the barrel with a muzzle brake is a cosmetic upgrade. It will not help with the accuracy of the barrel. The 20 inch barrel is our most accurate barrel.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (6/18/2018)

Q: Please explain some of the specifics between the stainless steel barrels and the "black steel" barrels. What steel is used in the black barrels (different than the SS barrels?) and what finishing process is used?

Asked by: A - 7/23/2018
A: Our black Steel barrels are Lothar Walther chrome moly and we blue them in order to change the color to black.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (7/23/2018)

Q: Regarding the Supergrade barrel interchange. IF zero at 100 yds, will the swap maintain zero?

Asked by: Larry - 8/28/2018
A: We recommend when changing a major component of the rifle to always re-zero the rifle. It should be close to zero but it is always best to double check in order to get the best accuracy possible
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (8/28/2021)

Q: I have a super grade Kidd 10/22 from you can I purchase a magpul stock where I can swap out the barrel without breaking down ? Ty

Asked by: Jim - 9/10/2018
A: This is a bit more complicated then just selling a stock to you. Depending on several factors action would need to be sent to us. Give our sales team a call 8305575433 and they will be able to give you the options that are available.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (9/10/2018)

Q: I was looking to do a full out Steel Challenge build, Threaded barrel end with cap and extra muzzle device for possible use later. extended mag release is not necessary for me, I do not completely understand the optional MOA optic base pads,Not sure if i would continue with the C-More or switch to a lower profile Vortex sight. and I would definitely be looking for the lightest reliable single stage trigger possible. Can you recommend a build parts list, pricing and lead time?

Asked by: Pete P - 12/9/2018
A: Yes, we can build our a rifle for you. Give our sales team a call 8305575433. They will be able to give you lead times which will vary depending on the options you choose.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (12/9/2018)

Q: Are different barrel lengths Available ? Is a 18" Limited specialty Diamond fluted SS .920 Bead blasted threaded and capped available in a 20"? Thank you, Nick

Asked by: Nick - 1/24/2019
A: Our Limited Edition barrels (Diamond, Sprial, 762 and 556) are only offered in 18 inches.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (1/24/2019)

Q: what is the weight of the super grade in 20 or 18 ?

Asked by: steven schechter - 3/12/2019
A: The approximate weight will be 7.5lbs with the 20 inch barrel and 7lbs with the 18 Inch barrel. This will vary depending on options you choose.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (3/12/2019)

Q: Does a muzzle brake come with a super premium rifle custom build if you ordered a threaded end cap on the barrel?

Asked by: Robert Larsen - 9/27/2019
A: You will need to make sure you select the threaded and cap option when selecting a barrel so that the barrel is threaded to accept the muzzle brake which will need to be purchased separately.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (9/27/2019)

Q: Hello I would like to know if I order a super grade rifle if it will come bedded and fully assembled? Thankyou

Asked by: Kent pierce - 4/30/2020
A: Yes, the Supergrade Premium Rifle will come fully assembled, bedded and test fired. Please let us know if you have other questions.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (4/30/2020)

Q: Do you offer the Supergrade with the Grey stock?

Asked by: Charles Beall - 5/27/2020
A: Yes, we have Black, Gray, Green and Tan stock options for this build.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (5/27/2020)

Q: If I order a supergrade with the magpul stock, would it be possible to order a chassis to fit it at a later date and still have the proper milling for the rear tang and barrel installation holes that is needed for the supergrade barrel swaps? Also, would it be possible to order the chassis first and order the magpul stock later with these modifications (assuming I provide proof of purchase for the original rifle)? Thank you in advance for your time.

Asked by: William - 9/7/2020
A: You would need to purchase the Supergrade Premium Rifle so that the action can be bedded to the Magpul stock. The Chassis can then be purchased separately and will fit your Supergrade action without any modifications.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (9/7/2020)

Q: Is the Lead time on this rifle still around 2 weeks? Wasn’t sure if COVID was affecting your operation.

Asked by: Marc Hunt - 12/17/2020
A: We are running at about 2 weeks at the moment. Our website lead times are accurate.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (12/17/2020)

Q: Hello,Was wondering what is a ship time for your supergrade premium. Would you have an inventory with the more popular options? I am very impressed with the ease of the barrel interchangement. Thank you, I am looking forward to your reply.

Asked by: richard taylor - 2/4/2021
A: Our lead times are accurate on our website. We do not inventory builds they are made to order. Right now, build times are about 2 weeks.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (2/4/2021)

Q: A few years ago, I purchased a Supergrade from you that came in a McMillan stock. Is it possible to order another in the McMillan stock? Please advise, thanks, Jeff

Asked by: Jeff Mundy - 3/14/2021
A: McMillan is a great stock manufacture and they do offer many stocks for the .22LR. However, we do not keep an inventory of their stocks so you would need to order from them.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (3/14/2021)

Q: Any way to see what our selected build will look like?

Asked by: Jon Martin - 4/22/2021
A: Great questions. Although, you can not see it online reach out to our sales team and they can get some photos together for you.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (4/22/2021)

Q: Does threading barrel affect accuracy?

Asked by: Richard Davis - 5/18/2021
A: All builds are guaranteed to shoot .5in at 50 yards or better. This includes our threaded barrels. However, in a bench rest situation/competition we wouldn't advise threading or fluting the barrel because it can affect your accuracy.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (5/18/2021)

Q: New to rifle bedding here. If you remove the reciever to use the rear acces hole in order to clean the reciever, will the bedding process get ruined?

Asked by: Danny - 8/5/2021
A: The bedding process will not be ruined. You will need to remove the action from the stock in order to clean the internals of the rifle.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (8/5/2021)