A: Thank you for your question. Unfortunately, we do not ship internationally at this time.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Kelsey (2/16/2026)
Q:Does this fit the Victor RPG Chassis?
Asked by: Erik
- 1/19/2026
A: Thank you for your reply. Our 9 degree slope tang will work in that chassis.
Was this answer helpful?
2 of 2 Customer(s) found this Answer helpful.
Answer provided by: Kelsey (1/20/2026)
Q:I have a Victor Titan Stock. Is your receiver with rear tang compatible?
Thanks
Asked by: Steve Yakimow
- 1/1/2026
A: Thank you for your question. Our rear tang is not compatible with that stock.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Kelsey (1/2/2026)
Q:What is the torque for the chassis anchor that connects to the receiver? Both at the receiver junction and into the chassis?
Asked by: Kevin
- 6/5/2025
A: Hi Kevin, We recommend 25 in lbs to secure the action into the stock as well as the tang screw. -Good shooting! MKidd
Was this answer helpful?
1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Administrator (6/14/2025)
Q:Is the rear tang for the KRG Bravo the same as the rear tang for the KIDD Precision Chassis?
Asked by: Mark Leavesley
- 5/28/2025
A: It's not the same but our receiver will work with the KRG Bravo with the purchase of their specialized fastener kit. -Good shooting! MKidd
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Administrator (5/29/2025)
Q:Hi have one of your receivers. I was wanting to buy the rear tang to have it. I already have my gun mounted in a MDT field stock. Will these work with that? I really don't like the way I have to use their buffer to hook up to the rear of the stock
Asked by: Country Mac
- 5/24/2025
A: It doesn't look like this stock is inletted for our rear tang. -Good shooting! MKidd
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Administrator (5/29/2025)
Q:I don't know the brand or model of my stock? I would like to buy a Kidd rear tang for my 10/22. How would you like to work through this issue?
Asked by: James Nichols III
- 5/3/2025
A: Hi James, You can "write in" a likely stock, if you end up getting a different stock and don't like the way the rear tang matches up with the slant of your stock we will send you another rear tang. -Good shooting! MKidd
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Administrator (5/29/2025)
Q:Will the rear tang work on the Brownells BRN-22 Receiver?
Asked by: Durrell
- 4/11/2025
A: Hi Durrell, No, not without significant specialized machine work. -Good shooting! MKidd
Was this answer helpful?
0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Administrator (5/29/2025)
Q:Would this work for a TacSol X-Ring receiver?
Asked by: Chip
- 1/28/2025
A: The KIDD Rear tang is made for the KIDD receivers.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (1/28/2025)
Q:If I have a Victor Titan stock do I use their rear tang or yours?
Asked by: Kevin Arthur
- 1/12/2025
A: Their stock does not work with the KIDD Tang.
Was this answer helpful?
0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Shalee (1/13/2025)
Q:Will your rear tang attachment fit/work with Volquartsen stainless steel receiver? Has your aluminum sleeved barrel, shoots rather well but trying to upgrade stock.
Asked by: Tim
- 12/21/2024
A: Hi Tim, Our rear tang will not work with the VQ receiver without significant modification. -Good shooting!
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Administrator (12/21/2024)
Q:Does this rear tang, paired with the KIDD reciever work with the KRG bravo Stock without exta modifications? KRG says they have a specific screw for the rear tang and mounting point (to use in place of the KIDD scew)? Can both these questions be addressed? Thanks!
Asked by: Levi
- 11/9/2024
A: Hi Levi, Yes, our receiver with the rear tang can be used with this stock without extra modification. And yes, there is a specific mounting screw you can get from KRG or if you order the rear tang from us and tell us that you will be installing into this stock we will send you the needed screw. -Good shooting!
Was this answer helpful?
1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Administrator (11/9/2024)
Q:Hi - I am installing the Kidd's Receiver to Kidd's Chassis. The silver escutcheon attached to the tang (as shown in one of the pictures here) does not fit in the hole. Do I even need the escutcheon to secure the rear tang screw to the chassis.
Asked by: Ken Maiti
- 7/23/2024
A: Hi Ken, There is already a threaded hole in the chassis. No need for the escutcheon in our chassis. -Good shooting!
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Administrator (7/23/2024)
Q:I ordered your barrel/receiver combination along with a rear tang, and specified my stock. Over the weekend I machined the stock to fit the rear tang. The tang doesn't fit well into the stock and is recessed about 1/8".
Do you offer a rear tang that has a slope that matches the slope coming off the top of the receiver? This will end up being slightly above the stock, but I am OK with that.
Thank You
Asked by: Blayne
- 3/4/2024
A: Hi Blayne, We offer 4 different tapers to our rear tang. Please give us a call at 830-557-5433 to get a different rear tang. -Good shooting!
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Administrator (3/29/2024)
Q:Which model/ slope do I need for my KIDD Chassis?
Asked by: Charles Beall
- 10/15/2022
A: Our highest tang is need to the KIDD chassis. Our shipping department will make sure you get the correct tang if you enter the stock choice as the KIDD chassis when asked.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (10/15/2022)
Q:Do you sell just the attachment screw? The one that goes through the tang attachment to the stock.
Asked by: Joe
- 10/11/2022
A: Please give us a call and our sales team can help you.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (10/11/2022)
Q:Hallo
Is there any chance to get such a Rear Tang in Black in the next time ?
Greetings from Germany
Michael
Asked by: Dr. Michael Uth
- 9/23/2022
A: We offer the tang in black or silver. Good Shooting-Shalee
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (9/23/2022)
Q:Do you ever offer milling of other receivers at your shop for the tang? I have two tactical innovations elite22 receivers I want to add your tang to. Thanks.
Asked by: Joel
- 9/23/2022
A: We do not offer this service.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (9/23/2022)
Q:Does this work on Volquartsen actions? I assume the barrel needs to come off to cut the action for the tang?
Asked by: Frank Carrillo
- 4/25/2022
A: We only recommend our tang for KIDD receivers.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (4/25/2022)
Q:Can this be used with the KRG bravo 10/22 stock without modifications to the product or the stock?
Asked by: John Nodine
- 2/2/2022
A: The KRG stock will accept the KIDD Rear tang however you will need to make sure to purchase the screw needed from KRG.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Shalee (2/2/2022)
Q:Instructions call for a 1/2" bit. Tang is .5315 wide or 17/32". Has there been a change to the dimensions of the rear tang? Thanks.
Asked by: RonG
- 8/24/2021
A: There has not been a change in the dimensions of the rear tang. The Instructions provided are correct.
Was this answer helpful?
0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Shalee (8/24/2021)
Q:I am using a Kidd Tactical chassis. Is there a recommended torx tightness for the screws' tightness to the receiver and the one to the stock?
Asked by: Mike
- 3/2/2021
A: We recommend 10in lbs to secure the action into the stock as well as the tang screw.
Was this answer helpful?
1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Kelsey (3/2/2021)
Q:Can you ship the rear tang to Canada?
Asked by: Frank
- 6/30/2019
A: We do not ship internationally at this time. Please visit our international sales link: https://www.coolguyguns.com/-iInternational-Salesi_ep_44-1.html
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Kelsey (6/30/2019)
Q: Will that extension fit the standard Ruger receiver?
Asked by: Tom Foreman
- 2/19/2019
A: The KIDD tang is not compatible with the factory receiver.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Kelsey (2/19/2019)
Q:Do you know if the Hoque overmolded stocks can be altered to work with the Receiver Rear Tang attachment?
Asked by: Ted
- 11/7/2016
A: Yes, it works well! We have a personal rifle with this set up. Good shooting! KIDD
Was this answer helpful?
4 of 8 Customer(s) found this Answer helpful.
Answer provided by: Shay (11/7/2016)
Q:Hi, what spec is the screw that is used to secure the rear-tang to the stock, since I must have a bad screw that just wont tighten. The screw-threads make contact but it just wont stop?
Asked by: Phong
- 8/6/2016
A: Hi Phong, The screw is 1/4-20. That is strange that it won't tighten, any chance your escutcheon has come loose from the bedding? Good shooting! KIDD
Was this answer helpful?
6 of 9 Customer(s) found this Answer helpful.
Answer provided by: Administrator (8/8/2016)
Q:Are there any provisions to fit this tang on a factory Ruger receiver? I have a takedown in a Hogue thumbhole stock that needs extra bedding. If I send the receiver in, could you do the work?
Asked by: David
- 6/6/2016
A: We don't have any instructions for adding our rear tang to any other receiver besides our KIDD receiver. We will not be able to do custom work on other receivers. Good shooting! KIDD
Was this answer helpful?
7 of 11 Customer(s) found this Answer helpful.
Answer provided by: Administrator (6/6/2016)
Q:have a hunter x 22 stock want to put a rear tang reciver on it, can it be done?
Asked by: steve mace
- 5/14/2016
A: Yes, it works well! We have a personal rifle with this set up and plan to sell rifles on the stock with rear tangs installed. Good shooting! KIDD
Was this answer helpful?
18 of 20 Customer(s) found this Answer helpful.
Answer provided by: Administrator (5/17/2016)
Q:1. Must you remove the rear tang to clean the gun from the breach? Not a deal killer, just curious.
2. Will this work on a Boyd's Evolution stock? On the Evolution stock, there is a screw that appears to penetrate into the pistol grip, perhaps for reinforcement. It looks like it would interfere with machining out the hole for the escutcheon.
Asked by: Tom
- 1/3/2016
A: Hi Tom, In order to clean the breech with a rod the rear tang would need to be removed. I own a rifle with our rear tang installed on a Boyd's Evo, and the screw was not an issue. But as I recall it was close and mine was build a good 5 years ago. Good shooting! KIDD
Was this answer helpful?
7 of 9 Customer(s) found this Answer helpful.
Answer provided by: Administrator (2/1/2016)
Q:I would like to purchase a KIDD receiver with Rear Tang. Would you guys do the custom stock work if I shipped you the stock? The stock is a butler creek folding stock cut down for an SBR build. I appreciate your time.
Asked by: Gary
- 12/16/2015
A: We do not do custom stock work on customers stocks. We have machinist instructions for inletting the rear tang into your stock below: The tool that you will need is 1/2". After measuring the part give (+) .030 on the Z axis and (+) .005 on the x & y axis. Good shooting! KIDD
Was this answer helpful?
9 of 22 Customer(s) found this Answer helpful.