MagPul® Hunter X22 Stock Gray

Question

Q: If I buy a MagPul Hunter stock from this site, will I be able to add the rear tang to it, or will it need modification before I can do so?

Asked by: Andrew Covington - 2/28/2021

Q: Can/Should the barrel be free-floated in this stock? Thanks.

Asked by: Gene - 1/13/2020

Questions about this item? Ask here.

Accepted Answer

Hi Andrew,
Thank you for your interest in our products. We don't offer the service of machining this stock for our rear tang. This is something that we hope to offer in the future but we are having difficulty keeping up at this time. We do offer this service with the purchase of our supergrade premium rifle.
Machining instructions for the rear tang:
The tool that you will need is 1/2". After measuring the part give (+) .030 on the Z axis and (+) .005 on the x & y axis. Good shooting! Mary Kidd

Accepted Answer

A: We recommend a completely free floated barrel to achieve the most accuracy.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Kelsey (1/13/2020)

MagPul® Hunter X22 Stock Gray

Related Items