Skip to Main Content

KIDD Firing Pin with Spring

KIDD Firing Pin with Spring

KIDD Firing Pin

7 Review(s) Write a Review

Your Price: $29.50

aftermarket firing pin for a factory bolt

Questions about this item? Ask here.

MFN: KIDD-22FP

UPC: 810132050053

Availability: In Stock

Quantity

Description
Customer Reviews
Questions and Answers

Upgrade accessory for the 10/22® bolt
Achieve consistent ignition
Positive rim indentation
Properly hardened steel
Precision ground and wire EDM cut holding 0.0001" tolerance

Eliminate irregular rim indentation due to a blunt or improper firing pin. Our KIDD Firing Pin made from a wire EDM machine replaces the tool and die process of stamping out the factory firing pin. This difference in production results is a much higher quality part for your rifle.

Installation Note:

This compression spring is directional in nature due to one end being conical. When installing the spring be sure to keep the larger end of the spring toward the bolt face and the smaller end (conical) towards the rear.

Packaging includes:

firing pin

spring

Rating Snapshot

Select a row below to filter reviews.

7

0

0

0

0

Average Customer Ratings

5.0

Reviews Sorting

Shooter

Excellent upgrade. No more light strikes on brass. Five stars. Just do it.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: George from Yuma on 3/20/2021

Dude

I bought this firing pin expecting use to put it in the factory bolt, well that didn't go so well When Ruger stamped the hold down mark they put it in the wrong place on the bolt so the Kidd firing pin won't fit and work properly, I called them and they said Okay to send it back and we will credit you, even after the time they allowed for returns, All the other parts were easy to install and now I'm saving for that Kidd bolt to replace the crappy factory one. Thanks!!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Roger Sedell from Washington on 6/27/2018

Well made and worth it

Installed this firing pin in my new 10/22. Definitely noticed the difference in quality. Factory firing pin was rounded and did not have a well defined primer striking edge (...this was a new factory firing pin). The exacting tolerances of the Kidd pin are impressive. I expect years of dutiful service from my 10/22.

Did you find this helpful? 6 of 6 Found Helpful

Reviewed by: lvgambler from Nevada on 1/29/2016

All the difference in the world

In February my youngest son turned 18 and bought his first rife in his name, a Ruger 10/22 take down. Beautiful gun but from day one firing was inconsistent at best. He was seeing a 8-12% FTF rate no matter what ammo he tried. The failed rounds had barely a nick on them from the firing pin. Pulled the OE pin and replaced with a KIDD firing pin which took less than 10 minutes. Have not had a single FTF in last 2,000 rounds. Every casing has a nice solid dent from the firing pin.

Did you find this helpful? 30 of 30 Found Helpful

Reviewed by: RJ Rinfret from Gilroy,CA on 7/1/2013

wow

great product! fastest shipping I have ever seen, i just did the standard shipping and it was here in 2 days after purchase.. every part i ordered is amazingly great quality and i will only buy from these guys from now on!! thank you so much for making my sloppy ruger 1022 into a laser :)

Did you find this helpful? 4 of 6 Found Helpful

Reviewed by: ross from south lake tahoe on 2/14/2013

Owner

Great bolt, I installed it and went to the range. This rifle has a Kidd trigger, wedge and bolt. not yet glassed, Butler Creek in a Boyd's thumbhole stock. Ammo that would not shoot 10 rounds under a dime at 50 yds. before will do so now. the biggest problem is figuring out witch products made the most improvement?

Did you find this helpful? 5 of 7 Found Helpful

Reviewed by: Bob from Ogdensburg N.Y. on the canadian border on 10/9/2012

Rooster Poot

Inconsistant ignition is a real 10/22 issue. The stock pin fits sloppy and is prone to bounce within the bolt. This Kidd pin is recontoured and at least for me...solved these problems. I matched the pin, extractor, barrel and buffer for my build and the new accuracy is outstanding.

Did you find this helpful? 14 of 14 Found Helpful

Reviewed by: David Pyron from Arkansas on 4/11/2012

KIDD Auto Bolt Release

KIDD Auto Bolt Release

$13.50

In Stock

Add to Wish List

KIDD Bolt Handle -Silver with Black Viton

KIDD Bolt Handle -Silver with Black Viton

$38.50

In Stock

Add to Wish List

KIDD Bolt Handle - Black 762

KIDD Bolt Handle - Black 762

$38.50

In Stock

Add to Wish List