KIDD Extractor

Make sure you use a small tool (like an awl), steady hands, and have a 2nd pair of eyes at the ready... My finger slipped while putting this in, and the spring and plunger went flying. Thankfully I was able to locate both, but I was freaking out until I did. The product is well made and I should have no problems using it.

I ordered this extractor to replace the not-so-reliable one in my 10/22. My gun would not cycle Federal Automatch from a BX 25 magazine consistently. After looking at the casings, I could see the extractor wasn't up to snuff. After replacing it, I put 250 rounds through without a problem. It's amazing what one tiny part will do to make your gun function great! Thanks Kidd!!!!

After I installed my KIDD barrel I experienced a few extraction problems using the stock Ruger extractor. After I did this swap (it's easy!), the gun has functioned flawlessly. Would recommend that folks purchase this extractor at the same time as the barrel.

A must have for your Ruger 10/22. Works well with all ammo including subsonic with manual bolt pull back and rounds from different manufacturers with no initial misfeeds. It is a very hard well machined part. Tony Kidd has produced another winner.

Was having extraction problems on my brand new Ruger 22/45 Lite. Had an extra Kidd extractor I bought for my 10/22 with a Kidd match barrel.So I replaced the one in the 22/45 with a Kidd extractor and no more problems. Again I want to says thanks to Tony for another QUALITY product.

Brass trapping on my Bentz chambered rifle. Polished bolt,lighter spring and guide (Kidd),polished feed ramp on magazines and tried different spring tensions on magazines and it still trapped brass? As a last resort I put in the Kidd extractor and was amazed that i had NO TRAPPED BRASS over 600 rounds of several types of ammo including pistol match ammo. In most guns the extractor has nothing to do with normal operation but in a 10-22 with the tight "Bentz" chamber (that was also polished) and bulk ammo the extractor is doing something! The best Ten Bucks I ever spent. Everything I have from kidd is first rate in all respects.

Cured my extraction problems

Got a new 10/22 and did even fire it until I replaced the extractor with this upgraded unit. Easy installation and years of trouble free service ahead!

I bought a stainless steel KIDD Match bull barrel 4 years ago and have had failure to extract issues when down loading on occasion. Finally came to my senses and ordered a KIDD extractor, now I have zero failure to extract issues. It grabs on to the case like a Pitbull only releasing it when the case hit the ejector. Definitely a must have with a precision barrel like a KIDD. Bought two, one for me and one for my father, we both have the finest barrels made.

Fits and functions perfectly. Easy to install.