Kidd black ring charging assembly

KIDD Black Ring Charging Assembly

11 Review(s) Write a Review

Your Price: $50.00

replacement part for the bolt handle assembly KIDD Bolt Handle Charging Assembly With Guide Rod & Springs -Black Ring

Questions about this item? Be the first to ask here.

MFN: KIDD-22GRSK-BR

UPC: 810132050589

Availability: In Stock

Quantity

Description
Customer Reviews

Upgrade the bolt handle assembly in the 10/22®
Slick guide rod for easy racking
Interchangeable tuning springs:(white=standard, red=10% increase, green=10% decrease)
Handle length: 1 3/4", Weight: .3oz, Finish: anodized aluminum

This great upgrade kit for your 10/22® will provide you with a comfortable bolt handle to grasp, a "super slick" guide rod, and the ability to tune the recoil of your rifle with our interchangeable springs. Bolt handle length is 1 3/4", which is 1/4" longer than the factory bolt handle giving greater clearance for the shooter's knuckles while racking the bolt.

The three tuning springs come in varying tensions for the ultimate in tuning capability. The standard tension spring will serve the shooter throughout most of the different ammunition velocities. But if, due to tolerance stacking or preferred ammunition the cycling of the action is out of sync, then the shooter has the capability to change the spring without using the more primitive and permanent method of cutting coils to tune a spring.

Precision ground guide rod is made from hardened tool steel and held to 2/10,000" tolerance throughout its entire length. The rod is nitride treated which gives its surface a 70C rockwell (harder than a file) surface hardness. Guaranteed the smoothest and slickest guide rod in the industry.

Packaging Includes:

bolt handle

guide rod

3 tuning springs

Installation instructions:

After removing the stock from the barreled action, remove the trigger and bolt stop. This will allow the needed clearance for the bolt to be removed along with the bolt handle assembly. After choosing your proper spring tension slip the bolt handle assembly in from the ejection port, placing the cone end of the rod into the containment hole in the receiver. Then fully compress the bolt handle assembly while placing the bolt on it. After the mating of the bolt handle and bolt, let off the containment allowing the bolt to go forward. Install the bolt stop pin (or upgrade with our bolt buffer), trigger and stock. The video above offers some of the finer installation points.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.8

View All Reviews - Reset

Reviews Sorting

Been using Kidd charging handles, guide rods and spring sets in my 10/22 builds for at least 10 years. Put a "plinker" together out of spare parts I had laying around about a year ago and dropped in an old Ruger bolt guide rod that were in the bottom of the parts bin. The gun ran, but not great. About a month ago I got it out for the grandkids to shoot and while not as slow as a single shot, it certainly didn't run like a semi-auto should. Changes out the bolt and charging handle assembly with Kidd part and it runs great. Thanks for reminding be how much smoother the best guide rod, charging handle and spring set is then those of lesser quality.

Did you find this helpful?

Reviewed by: JACK S CASH from WALKERSVILLE on 9/9/2024

quality

Quality product. Great company to work with.

Did you find this helpful?

Reviewed by: Joyce Mahon from US on 6/13/2024

working great

Everything has been working great thank y’all so much I will definitely be ordering all of my parts from you guys from now on

Did you find this helpful?

Reviewed by: seth from SC on 5/29/2024

The man

Nice addition to my scoped 10/22 the bigger handle is worth it.

Did you find this helpful?

Reviewed by: Michael Burke from Leasburg on 5/23/2024

absolutely perfect

The spring kit and charging handle are absolutely perfect for me and my Rifle. I own a fletcher rifle works 11/22 which features an open top receiver. Installation was a dream. And function test was so perfect! Looking forward to running the light spring with speed of smell subsonic ammo and suppressor now will let yall know how awesome it runs. For now subsonic ammunition going around 1000/fps are cycling the bolt with suppressor and standard spring and subsonic going at 900/fps require manual action but, the charging handle is much more forgiving than the skeletonized original.

Did you find this helpful?

Reviewed by: Joe Jackson from Texas on 4/29/2024

Charging handle

Love the three rings, sure and positive grip. Protrudes just enough to give extra clearance when charging the chamber.

Did you find this helpful?

Reviewed by: Thomas A Gunter from Charlotte on 4/11/2024

Shooter

Right on point. Quality materials and solved my "sticky" open bolt release issue.

Did you find this helpful?

Reviewed by: Mikel Gager from Clutier on 4/1/2024

charging handle not long enough

I have very small hands and thought this would work for me, but I found a longer one from tandem cross. Still, I used the Kidd spring and rod. Just needed a longer handle.

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: MaryLynn Hansen from Steamboat Springs on 3/24/2024

shooter

This really smooths charging the 10 22 and bolt function. The guide rod is really slick, and the diameter matches the bolt handles. With most rods you will feel roughness and drag spots when you cock. Not the KIDD. Being able to adjust spring tension is excellent. We shoot all winter in Idaho. Using a light spring in low temperatures gives me good functioning. Then switch to regular spring in warmer conditions.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Robert from Emmett on 12/13/2022

Excellent craftsmanship

A little tricky to install but the charging handle and rod are very nice and very smooth.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Yeokum from Tuscumbia, Mo. on 3/16/2020