We have developed a unique barrel
interchangeable system with an extra long barrel extension of 1 7/8"
length (compared to the standard 3/4" barrel extension). With this design the customer can now easily
slip the barrel in and out of the receiver without resistance and still
maintain the utmost in stability and harmonics. KIDD now offers this alternative with our
three part locking and stabilizing system sliding into a reinforced
receiver. With a 1 7/8" barrel
extension, utilizing an indexing flat, clamping v, and clamping flat. The indexing flat allows the shooter to perfectly
time the barrel so that the extractor cut is properly aligned. The clamping v and flat secure the barrel
into the receiver with two 1/8" hex head bolts.
In our premium Supergrade line of custom rifles we inlet and
bed each rifle. The receiver's front flat and rear
tang are bedded. The stock is modified
with access points so that the barrel can be removed without removing the
stock. WHAT! Yes, you can change to another KIDD
Supergrade barrel without even taking the stock off of the rifle. After removing the magazine and making sure the chamber is clear, simply unscrew the two locking screws and pull out
the barrel. Then, slip in your next KIDD
Supergrade barrel while applying downward pressure and with a slight turn of
the barrel. Use the indexing flat to make sure the barrel is properly timed and
fully installed. Tighten the two 1/8th hex screws to
snug and away you go. KIDD sells a locking torque screwdriver to give you the desired 26.6in lb torque.
Our Supergrade receiver comes with the easy access
rear cleaning hole and interchangeable low scope base with varying MOAs
available. A zero degree scope base will come installed on the receiver and an optional 10, or
20 MOA can be purchased to assist the shooter in reaching the longer
distances. Both the scope base and rear
tangs have mating designs to the receiver so that our rifles have great rigidity
as well as some customization aspects. We machine each receiver from billet
6061 T6 aluminum and use an anodized finish either black or silver.
The Supergrade receiver will be assembled using our quiet
bolt buffer, counter sunk receiver pins with two 1/16th hex screws holding them in place, guide rod, tuning springs, and take down screw. The magazine provided with the rifle will be a
10 round rotary magazine which will be tested/fitted and shipped with your new
KIDD. We must ship rifles to a federal
firearms license or FFL in your area.
The bedding process does not allow for the barrel channel to be removed. When installing attachments to the stock the M-LOK® System MagPul® has developed will allow you to install their attachments without taking the action out of the stock.
Special Federal Shipping Rules Applicable to Receivers/Barreled Actions/Rifles:
We are required to send this rifle to your local FFL (Federal Firearms Licensed Dealer). That is why we have the comment box above this description with the required information for your FFL name/phone#/email address. This is the only place that needs your FFL's information. Please do not use your FFL shipping information during checkout. Your billing and shipping information required during checkout of this product is your identifying information with your credit card company and will likely be declined if you use the FFL shipping address. After your order is placed, we will reach out to your FFL and get a copy of their license which we then verify with the ATF before shipping. Once your FFL receives your order, you will need to go to your FFL in person to fill out form 4473.
(Note: Listed above are the federal rules for purchasing. There are some states with extra steps involved)
Must be 18 or older to purchase a rifle barreled action.
US Patent 9664472
Issued 2017-5-30