Skip to Main Content

Black scope base for Kidd receiver

Black scope base for Kidd receiver

Aftermarket 0 MOA KIDD Receiver Scope Base -Black

0 Review(s) Write a Review

Your Price: $42.50

picatinny scope base for KIDD receiver

Questions about this item? Ask here.

MFN: 96

UPC: KIDD-PICRAIL-MOA-0B

Availability: In Stock

Quantity

Description
Questions and Answers

Picatinny scope base for the KIDD .22 receiver
MOA Option: zero
will not work with any receiver except KIDD

This scope base will mate with the slot cut on the KIDD Classic or Supergrade receiver models. This zero MOA is designed to be used for 50 yards or less. The farther you would like to shoot the more likely you will need an increased MOA base.

Package includes:

scope base

three screws

hex wrench

Q: What MOA base and ring size are needed to cleanly mount a 50MM objective lens on a Kidd rifle? 50-200 yd range. This scope in particular. Athlon Argos BTR 6-24X50mm. Thank you. I want the scope as low as possible, but not touching.

Asked by: pm - 6/20/2022

A: We recommend high rings for 50 MM objectives.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Shalee (6/20/2022)

Q: My wife has a 10/22 style rifle built entirely of your parts, She has taken an interest in long range precision shooting and is running out of elevation adjustment on her scope, she has your bases and it is ramped but we can’t remember if it’s a 10 or 20 moa, if it’s a 10, we want to order a 20. Can you give us the dimensions on them so we know which one we have? Any possibility of 30 or maybe even 40 moa rails in the future? Thanks for you help! PS, she is 69 years old, loves her rifle, and shoots 1/4” group's at 50 yards all day long!

Asked by: Larry - 2/18/2022

A: Hi Larry, I looked up your order history. The scope base you ordered was a 20 MOA. We do not offer any other MOA. Give us a call and we can give you some suggestions.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Shalee (2/18/2022)

Q: Should the mounting screws be Loctited and what torque setting would you use?

Asked by: Rick - 8/22/2019

A: Yes, a small amount of blue Loctite will be okay. Make sure the Loctite doesn't get onto your firing pin. You may want to let it dry before installing the bolt. We recommend hand tightening the screws. They have small threads so be careful not to torque them.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Shalee (8/22/2019)

Q: My Kidd rifle has a zero moa scope base. The front of my scope is very close to the barrel , and cannot go any lower. Does the 10 moa scope mount lower the front of the scope to achieve the correction? In other words, is the front of the 10 moa base sit lower than the front of the zero moa base?

Asked by: Jeff Meyers - 7/15/2019

A: Yes, the front of the 10 MOA does sit lower than the 0 MOA base which will point your scope down towards the barrel.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Shalee (7/15/2019)

Q: Would you consider making a version of this base that extends an inch or so further? The current version doesn't provide adequate eye relief for larger scopes when shooting in seated position.

Asked by: Xavier - 2/2/2019

A: I am sorry but we only offer the one option. We do not offer custom products.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Shalee (2/2/2019)

Q: What size and thread pitch are the bolts used to mount this base to the KIDD receiver?

Asked by: Javi - 8/21/2018

A: The screws are 6-32 X 3/8

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Shalee (8/21/2018)

Q: Can the 20 and/or 20 MOA base be mounted backwards in case I need to lower the front of the scope? I hope I am asking this question right. Thanks!

Asked by: MG - 8/9/2016

A: Hi MG, We have an offset middle screw, so that the base can not be mistakenly mounted backwards. Good shooting! KIDD

Was this answer helpful? 5 of 6 Customer(s) found this Answer helpful.

Answer provided by: Administrator (8/9/2016)

Q: Will I be able to mount this 20 moa rail on my stock ruger reciever ?

Asked by: Robert Martinez - 3/10/2016

A: We have different mounting holes on our scope base made for our receiver. This base will not work on a factory receiver and at this time we don't make a 20 MOA for a factory receiver. Good shooting! KIDD

Was this answer helpful? 4 of 5 Customer(s) found this Answer helpful.

Answer provided by: Administrator (3/25/2016)

Q: Can you please tell me what style of scope rings are compatible with the base? Weaver, or picatinny? (sorry I'm new at this)

Asked by: Dave Hill - 2/29/2016

A: Thank you for your interest in our product. The picatinny style rings will work well with our scope bases. Good Shooting! KIDD

Was this answer helpful? 6 of 7 Customer(s) found this Answer helpful.

Answer provided by: Administrator (3/4/2016)

Q: Are the scope bases marked as to 0, 10, or 20 deg, and can they be installed backwards to give you the wrong tilt direction?

Asked by: B.P. - 1/12/2016

A: Hi B.P. The package is marked as to 0, 10, or 20 but the base itself is not. The middle screw is off set to prevent a backwards installation. Good shooting! KIDD

Was this answer helpful? 7 of 8 Customer(s) found this Answer helpful.

Answer provided by: Administrator (2/1/2016)

Questions about this item? Ask here.

Kidd bolt buffer

KIDD .22LR Bolt Buffer

$10.22

In Stock

Add to Wish List

Kidd black v-block with mounting screws

KIDD V-Block -Black

$26.50

In Stock

Add to Wish List

Kidd silver takedown screw

Takedown Screw -Silver

$8.00

In Stock

Add to Wish List